top of page

BELTS

This is the quintessential leather belt. Made from 10oz Italian vegetable tanned leather it is built to last. The buckles are secured to the belt with 3 solid brass Chicago screws. These screws can be removed for easy regular maintenance and conditioning of the belt. The centre bar buckle is designed so that a traditional leather keeper is not required. This results in a clean finished closed belt and with a billet of 4" it will easily tuck into your belt loop.

Features

Buckles

  • 10oz Vincenzo Full Grain Vegetable Tanned Italian Leather.

  • Strap Width 1.5"

  • 5 holes spaced by 1" on center.

  • Centre Bar Buckle is solid brass in either Antique Brass, Matte Nickel or Bright Nickel.

  • Heel Bar Buckle is solid brass in Matte Black.

HOW TO MEASURE A BELT

Belt Guide

I HAVE A BELT

It's easy to measure a belt. Simple take your existing belt and lay it flat on a table. With a fabric tape measure place the end of the tape at the tip of you current belt. From there measure down to the most used hole, this is your belt size.

**Sometimes belts will get deformed and will end up with a bent in the middle. This will impact your measurement, so be sure to straighten your belt as best as possible to get an

accurate measurement.

I DON'T HAVE A BELT

If you don't have an existing belt it's easy to measure your waist. Take a fabric tape and loop it through the belt loops on your waist. Make sure the tape isn't pulled to tightly and read the closest 1/2" measurement.

MADE TO ORDER

Interested in a bespoke piece made from this unique leather? Contact us today for a quote on your custom piece. 

Upload File

Thanks for submitting!